2022 Prep4away Nutanix NCM-MCI-5.15 Dumps and Exam Test Engine
Nutanix NCM-MCI-5.15 DUMPS WITH REAL EXAM QUESTIONS
Learn about the difficulty of the Nutanix NCM-MCI-5.15 Exam
The equally important question is, why is this exam so challenging? The reason behind this is the fact that there is no set curriculum. As far as the certification is concerned, the exam covers all the aspects of the product. The candidate will be expected to perform all the functions and features of the product. The exam will test your skills and abilities. Nutanix NCM-MCI-5.15 Dumps will make it easier for you to prepare for the exam and the candidates will also be able to prepare for the exam easily. We make sure that you get the best preparation for the exam and you are 100% prepared to take it. You can read and learn about the product by yourself. We provide you with the latest version of the product.
Learn about the Best Solution for the preparation of Nutanix NCM-MCI-5.15 Exam
The best solution to prepare for the exam is to use Nutanix NCM-MCI-5.15 Dumps. Our products are well designed and they help you to prepare for the exam in an easier manner. Our products are updated regularly and we keep you informed about the changes in the exam. We make sure that you prepare for the exam in the best way possible. Conversely, if you study from a different source, you will not be able to prepare for the exam as you should. Nutanix NCM-MCI-5.15 is a difficult exam and it is important that you prepare for it as it will help you to enter the industry and gain employment in the right manner. We provide you with the best preparation materials that will help you to prepare for the exam in the most effective way possible. Our products will help you to perform better in the exam. You can also share your knowledge with your friends and colleagues. You can also use our services to prepare for the exam.
NEW QUESTION 30
An administrator inherits a new Nutanix environment and logs in to a CVM to check the network configuration. The configuration is as follows:
Which action should the administrator take to improve network performance?
- A. Configure balance-sib or balance-tcp mode for br0-up if switch configuration allows
- B. Add eth0 and eth1 to the br0-up bond
- C. Configure VLAN tagging both on br0 and br1 and their physical interfaces.
- D. Remove one 10 Gbs interface from br0-up to make sure all 10 Gbs can be used.
Answer: D
NEW QUESTION 31
A customer has a Nutanix cluster with 10Gb connectivity via switch fabric extenders. The administrator receives NCC health check errors of latency greater than 200ms.
Which action should the administrator take to resolve the NCC errors?
- A. Add 2 additional 10G uplinks from the switch fabric extenders per node
- B. Upgrade NCC and increase the vCPU of the CVM
- C. Replace the switch fabric extenders with 10G line rate switches
- D. Upgrade NCC and increase the CVM memory by 4Gb
Answer: C
Explanation:
Explanation
Ref:
https://portal.nutanix.com/page/documents/details?targetId=System-Specs-G6-Single-Node:set-block-connect-c.
NEW QUESTION 32
Refer to the exhibit.
A Nutanix host is connected as shown in the exhibit with br0-up set to active/backup. Physical Switch 1 experiences a power outage causing br0-up to failover to using eth2. The CVM and host become inaccessible. User VMs restart on other hosts in the cluster, which causes a disruption to those VMs.
Which configuration issue likely caused this outage?
- A. The upstream port for eth2 is missing a VLAN.
- B. The user VMs only have one NIC
- C. Bridge br0-up should be configured to use balance-tcp rather than active/backup.
- D. The CVM should have eth1 connected to the OVS.
Answer: A
Explanation:
Explanation
Ref:
https://portal.nutanix.com/page/documents/solutions/details?targetId=BP-2071-AHV-Networking:top_ahv_netw
NEW QUESTION 33
An administrator needs to make sure an RF2 cluster can survive a complete rack failure without negatively effecting workload performance. The current cluster configuration consists of the following:
* 30 nodes: distributed 10 nodes per rack across three 42U rack
* Each nodes is configured with 40TB usable storage all flash (Cluster Total 1.2 PB Usable)
* Current cluster utilization is 900TB storage
Which configuration changes should be made to make sure that the cluster meets the requirements?
- A. Expanse the cluster by adding 8 nodes to a new 42U rack
- B. Expanse the cluster by adding 3 additional nodes per rack, 9 nodes total.
- C. Expanse the cluster by adding 9 nodes to a new 42U rack
- D. Expanse the cluster by adding 2 additional nodes per rack, 6 nodes total.
Answer: C
NEW QUESTION 34
An administrator manages the following two Nutanix AOS 5.15 cluster environment:
* Corp-cluster-01
* Corp-cluster-02
The VM images must be available only on Corp-cluster-01, but cannot be checked out to cluster Corp-cluster-02. The images also cannot be checked out to any other clusters that are registered with Prism Central in the future.
Which two configuration settings must the administrator choose when creating the image placement policy that satisfies the stated requirements? (Choose two.)
- A. Create an image placement policy that identifies cluster Corp-cluster-02 as the target cluster.
- B. Set the policy enforcement to Hard.
- C. Create an image placement policy that identifies cluster Corp-cluster-01 as the target cluster
- D. Set the policy enforcement to Soft.
Answer: B,C
Explanation:
Explanation
Ref: https://next.nutanix.com/community-blog-40/nutanix-just-made-ahv-image-management-painless-33144
NEW QUESTION 35
An administrator receives a notification that storage in a Nutanix cluster is unavailable. The cluster consists of five nodes and is configured with a Fault-Tolerance level of 1 (FT-1).
Upon investigation, the administrator finds the following:
* All AHV hosts are powered on and the CVMs are running
* Nodes A, B, and C are connected to one top of rack switch
* Nodes D and E are connected to a second top of rack switch
* The cluster status command run on Node A shows that CVM services on nodes D and E are down Which issue is causing the storage outage?
- A. Nodes D and E are in maintenance mode.
- B. The default gateway for the CVMs and AHV hosts is down.
- C. The switch connecting Nodes D and E is down.
- D. The genesis process is down on both Nodes D and E.
Answer: C
Explanation:
Explanation
https://hyperhci.com/2020/07/29/nutanix-cluster-services-down-troubleshooting/
NEW QUESTION 36
Refer to the exhibit.
A Nutanix host is connected as shown in the exhibit with br0-up set to active/backup. Physical Switch 1 experiences a power outage causing br0-up to failover to using eth2. The CVM and host become inaccessible.
User VMs restart on other hosts in the cluster, which causes a disruption to those VMs.
Which configuration issue likely caused this outage?
- A. The upstream port for eth2 is missing a VLAN.
- B. The user VMs only have one NIC
- C. Bridge br0-up should be configured to use balance-tcp rather than active/backup.
- D. The CVM should have eth1 connected to the OVS.
Answer: A
Explanation:
Explanation
Ref:
https://portal.nutanix.com/page/documents/solutions/details?targetId=BP-2071-AHV-Networking:top_ahv_netw
NEW QUESTION 37
An administrator is managing multiple Windows and Linux VMs connected to Nutanix Volumes. The Linux VMs are experiencing intermittent connectivity issues. The Windows VMs do not experience the same issue.
Which option should the administrator use to resolve this issue?
- A. Set the SCSI timeout value to 60
- B. Utilize Jumbo Frames
- C. Add additional disks to the Volume Group
- D. Utilize a separate subnet for the Linux VMs
Answer: A
Explanation:
Explanation
Ref: https://kb.vmware.com/s/article/1009465
NEW QUESTION 38
An administrator needs to expand a cluster based on AHV and running on Nutanix G5 hardware with a new Nutanix G7 system. The cluster is running AOS 5.10 but the operation fails when expanding the cluster. AOS is running on the new system. There are no issues discovering the node.
Why is the operation failing?
- A. G7 hardware cannot be added to a G5 cluster.
- B. AOS version running on G7 is older than the version on the cluster.
- C. EVC needs to be configured before cluster expansion
- D. Foundation software has not been updated on the cluster.
Answer: B
Explanation:
Explanation
Ref: https://next.nutanix.com/installation-configuration-23/product-mixing-restrictions-37231
NEW QUESTION 39
A customer has a primary datacenter with 12 Nutanix blocks distributed across three racks. The customer wants to achieve the most resiliency possible. They also have a datacenter in a branch office that is 400 kilometers away from the primary datacenter.
Which two solutions should be used? (Choose two.)
- A. Time Stream to a remote site
- B. Rack awareness
- C. Block awareness
- D. Async DR to a remote site
Answer: B,D
NEW QUESTION 40
Over the period of 2 to 3 weeks, a cluster displays the following:
*Periods where Warning Alerts of memory usage over 75% are asserted
*Periods where Critical Warnings of memory usage over 90% are asserted
*Periods of slow of frozen VDI desktops have caused work stoppage or slowdown
*VDI clones have periodically not powered up when called, causing work stoppage Which steps should be used to prioritize the administrator's troubleshooting efforts?
- A. *Review Analysis Page for memory use pattern
*Alert with VDI workload demand
*Analyze current and future workload in the Capacity Runaway tab for sufficient resources - B. *Assess resource health on Hardware page
*Review the Analysis page for memory usage demand
*Determine the VDI workload-to-host affinity across the cluster - C. *Analyze Alert Pages for a root cause of memory problem
*Analyze VM table page to access the VM functionality
*Analyze the VDI Clone properties for possible VDI Workload stress - D. *Check Analysis page for CPU demand
*Verify VDI workload property for memory subscription
*Review the Hardware page to determine if the cluster has sufficient RAM
Answer: A
NEW QUESTION 41
Refer to the exhibit.
An administrator logs in to Prism and sees the status shown in the exhibit within the Hardware Diagram section.
What should the administrator do?
- A. Reseat all disks immediately. If this does not help, reseat the nodes.
- B. Restart all CVMs for the cluster to check, confirm health and repartition and add the disks.
- C. Resolve all alerts and re-import the disks to make sure there is no service disruption.
- D. Check status of applications running on the cluster and call support
Answer: D
NEW QUESTION 42
A customer has two mission-critical applications and needs to have them backed up to a remote location. The remote location is connected using a leased line and has an average latency of 7 ms.
Which Nutanix technology will provide the shortest RPO possible?
- A. Leap
- B. Metro Availability
- C. NearSync
- D. Asyn&DR
Answer: A
Explanation:
Explanation
Ref:
https://portal.nutanix.com/page/documents/solutions/details?targetId=BP-2005_Data_Protection:BP-2005_Data
NEW QUESTION 43
An administrator is planning to deploy a Nutanix cluster to support a few high-performance VMs. This deployment will have the following considerations:
* Individual VMs will likely generate network throughputs in the range of 90-100Mbps
* Due to the configuration of the VMs, it is unlikely that a node will host more than one or two of them at a time
* Individual VMs will communicate with only a few (one or two) remote hosts at a time
* Multicast will not be used in the environment
* The hosts are connected via two 1GbE network connections
How should the administrator configure the network bonds to meet this requirement while maintaining the simplest switch configuration?
- A. Configure bond0 as balance-lacp
- B. Configure bond0 as balance-sib
- C. Configure bond0 as balance-tcp
- D. Configure bond0 as active-backup
Answer: B
Explanation:
Explanation
Ref:
https://portal.nutanix.com/page/documents/solutions/details?targetId=BP-2071-AHV-Networking:top_ahv_netw
NEW QUESTION 44
An administrator is concerned that Prism will be inaccessible if Active Directory is unable to process logins.
Which method should the administrator use to access the cluster in the event of this type of outage?
- A. Deploy an Active Directory server locally on the cluster
- B. Manage the cluster remotely by downloading ncli to a remote workstation
- C. Create and use an emergency local account on the cluster
- D. Manage the cluster by using the "nutanix" user on the Prism leader CVM
Answer: C
NEW QUESTION 45
An administrator is deploying an application using Nutanix Volumes. After configuring the volume group and connecting the guest's iSCSI initiator to the volume group, they begin performance testing.
The administrator learns that performance on the virtual disk attached to the iSCSI initiator is far less than that of a virtual disk connected directly to the VM.
Which situation is causing this condition?
- A. The VM's iSCSI traffic is being routed to the data services IP subnet
- B. The duster data services IP address is a bottleneck, shared with other iSCSI traffic
- C. The performance test is generating small block random 10.
- D. Data Locality ensures that VM attached disks are always faster than iSCSI volumes.
Answer: B
NEW QUESTION 46
A VM does not have enough resources for the demand, which leads to performance bottlenecks. The VM is exhibiting one or more of following baseline values, based on the past 30 days:
* CPU usage > 90% (moderate), 95% (high)
* CPU ready time > 5%, 10%
* Memory usage > 90%, 95%
* Memory swap rate > 0 Kbps (no moderate value)
Which type of VM is being described?
- A. Over-provisioned VM
- B. Bully VM
- C. Constrained VM
- D. Inactive VM
Answer: C
Explanation:
NEW QUESTION 47
An administrator receives an error indicating that the CVMs in the cluster are not syncing to any NTP servers. An investigation of the issue finds:
* The NTP servers are configured in Prism
* The time on all CVMs is the same
* Both the CVMs and AHV hosts are configured for the UTC time zone
Which two steps can be taken to troubleshoot this issue? (Choose two.)
- A. Confirm that the NTP servers are reachable from the CVMs.
- B. Restart genesis on all CVMs.
- C. On a CVM. run the command a Hash ntpq -pn.
- D. Restart the chronos service on all CVMs.
Answer: A,C
Explanation:
Explanation
Ref: https://portal.nutanix.com/page/documents/kbs/details?targetId=kA032000000bmjeCAA#Review_ntpq
NEW QUESTION 48
An administrator is deploying a three-tier application on a Nutanix Enterprise Cloud consisting of web, application, and database VMs. Traffic between the servers must be limited to specific services/ports. There is an application layer firewall VM deployed on one host in the cluster.
In which way should the administrator meet this requirement?
- A. Categorize the VMs in Prism Central and utilize Flow to set a security policy
- B. Separate the web. application and database VMs on to dedicated VLANs
- C. Create a network for each type of VM, and use policy-based routing to control the traffic flow
- D. Configure a security policy and service chain redirecting the server traffic through the firewall
Answer: A
NEW QUESTION 49
An administrator is deploying several new application VMs to a Nutanix cluster. The application is very transactional with a 28/72 random, read/write ratio.
What should the administrator do?
- A. Add one large SSD to each node and enable Flash Mode for the VMs.
- B. Add one large virtual disk to each VM. and use it for all application data.
- C. Add a minimum of four virtual disks to each VM, and aggregate them on guest OS level.
- D. Add a minimum of four SSDs to each node to ensure all writes go to the SSDs.
Answer: C
Explanation:
Explanation
Ref: https://next.nutanix.com/server-virtualization-27/iops-latency-issue-1168
NEW QUESTION 50
The networking team makes changes to the Top of Rack switches to which the Nutanix cluster are attached. A few VMs are able to communicate with each other on the same node but are unable to connect to other parts of the network.
What is the likely cause of this issue?
- A. There is a VLAN misconfiguration on the switch.
- B. The vNIC port is disconnected on the affected VMs.
- C. Jumbo Frame are misconfigured across ports.
- D. There is a VLAN misconfiguration on the VMs.
Answer: A
NEW QUESTION 51
A system administrator needs to shut down an AHV node in a Nutanix cluster without causing service disruption. The administrator checks data resiliency and verifies that the cluster can tolerate a node down.
Which three steps should the administrator perform next? (Choose three.)
Answer:
Explanation:
Explanation
1 allow vms 2 sd CVM 3 sd node
NEW QUESTION 52
......
2022 New Prep4away NCM-MCI-5.15 PDF Recently Updated Questions: https://actualtests.prep4away.com/Nutanix-certification/braindumps.NCM-MCI-5.15.ete.file.html