[Nov-2021 Newly Released] Pass 1Z0-1079-20 Exam - Real Questions & Answers
Pass 1Z0-1079-20 Review Guide, Reliable 1Z0-1079-20 Test Engine
NEW QUESTION 19
Which are the two ways in which Milestones differ from Agents? (Choose two.)
- A. Agents monitor for a condition to occur, whereas Monitors only start and stop based on a time-based schedule.
- B. Milestones may be made up of one or more Agents.
- C. Agents may be made up of one or more Milestones.
- D. Milestones may be both "reactive" (for example, they monitor for a condition to occur) and "proactive" (for example, they can initiate before, at, or a prescribed number of times after a condition occurs).
- E. Milestones monitor for a condition to occur, whereas Agents only start and stop based on a time-based schedule.
Answer: B,D
NEW QUESTION 20
When a new Service Provider is created, OTM automatically does which of the following?
- A. OTM associates the Service Provider calendar with the calendar of the CORPORATION ID identified during setup.
- B. OTM sends an email or fax to the Service Provider contact, depending on the contact's preferred contact method.
- C. OTM assigns the default Calendar defined in the Parameter Set.
- D. OTM creates a corresponding LOCATION, with the location Role of "CARRIER".
Answer: C
NEW QUESTION 21
Identify the incorrect option about the commodity setup.
- A. You can select transportation modes while defining a commodity.
- B. You can link commodity with equipment types while defining a new commodity.
- C. Incompatible commodities can be captured while defining a commodity.
- D. Specific temperature controls cannot be assigned while defining a commodity.
Answer: D
NEW QUESTION 22
After creating a report, which step must occur in order to register the report for execution within Oracle Transportation Management?
- A. Select the Report System and specify the Report Path.
- B. Create a new Data Source pointing to the OTM database.
- C. Make a directory "BIPCatalogUtil" under [BI Publisher Home]/
- D. Create a new Data Source pointing to the BI Publisher database.
Answer: C
NEW QUESTION 23
Which output option from the below is available for exporting data using the CSV Export function?
- A. text editor programs such as Notepad
- B. a file on your database server
- C. MS Excel
- D. browser window
Answer: B
NEW QUESTION 24
If a Rate Record and a Rate Offering are configured with conflicting values in the same data elements, how does OTM address this?
- A. During planning, the user will have the option of indicating if OTM should prioritize either the Rate Offering or the Rate Record setting.
- B. The Rate Offering will take priority over the Rate Record configuration.
- C. The Rate Record will take priority over the Rate Offering configuration.
- D. Such a conflict cannot exist in OTM.
- E. OTM's planning engine will run the solver for both settings, but only consider the least cost result.
Answer: D
NEW QUESTION 25
You are writing an agent to be triggered when an Order Release Update is received via integration. You would like the agent to check if the Order Release is on a shipment and if it is, you want OTM to only update the Order Release.
Which option will achieve this?
- A. You can use an agent saved condition to identify OR ON SHIPMENT and use the ORDER RELEASE - MOD - FUTURE PROCESSING agent action.
- B. You can use an agent saved condition OR ON SHIPMENT and use the ORDER RELEASE - MOD - NO PROCESSING action.
- C. You can use an agent saved condition to identify OR ON SHIPMENT WITH RESOURCES TENDERED/ SECURED and use the ORDER RELEASE - MOD - NO PROCESSING agent action.
- D. You can use an agent saved condition to identify OR ON SHIPMENT and use the ORDER RELEASE - MOD - NO PROCESSING agent action.
- E. You can use an agent saved condition to identify OR ON SHIPMENT and use the ORDER RELEASE - MOD - FULL IMPACT action.
Answer: C
NEW QUESTION 26
In the process of "Adjust shipment cost scenario," you select "reversing and adjusting" Shipment cost.
What will be performed by OTM?
- A. The system reverses a cost by creating a new cost with a negative amount that matches the amount of the original cost.
- B. The system creates a new cost that negates the original cost. Then it creates another new cost with the new cost value.
- C. The system gives the user an option to update the amount.
- D. The system takes the original cost and adds or subtracts an amount to it to create the new cost.
Answer: A
NEW QUESTION 27
You've executed a CSV upload in which you have modified some existing records, and created some new records. There were no errors during the upload. However, OTM is still retrieving only the old data, not the new data that was just uploaded.
Select the action that you can take to address this.
- A. You must reboot the database server in order to commit the changes.
- B. Rerun the upload, this time making sure that you specify the "dd" command.
- C. Rerun the upload, this time making sure that you specify the "uu" command.
- D. Rerun the upload, this time making sure that you specify the "ii" command.
- E. You should clear the OTM cache.
Answer: A
NEW QUESTION 28
You are writing an order release agent and need to listen for an order modification event triggered by an integration update to the order release.
What is the impact to the agent process if you set the "before persist" flag on the ORDER - MODIFIED event?
- A. OTM stages the new data, will perform the agent actions, will not allow you to use certain actions.
- B. OTM will not persist the new data but will perform the agent actions as long as they do not require persisting the new data.
- C. OTM stages the new data but will not perform the agent actions if the data is not persisted properly.
- D. OTM will persist the new data immediately after the agent is triggered and then perform the agent actions.
- E. OTM will perform the agent actions but will not persist any changes to the object.
Answer: E
NEW QUESTION 29
Identify the incorrect option pertaining to TiHi.
- A. This configuration captures the number of layers of boxes/cartons that can be stacked on the pallet.
- B. This is configured in Item Setup.
- C. This configuration captures the number of boxes/cartons stored on a layer.
- D. This configuration will impact mixed pallet functionality.
Answer: A
NEW QUESTION 30
By default, OTM installs some agents at the time of installation.
Identify two correct statements. (Choose two.)
- A. All agents are inactive. The Administrator or other authorized persons must review and activate those they want to run in their environment.
- B. All agents are active. The Administrator or other authorized persons must review and deactivate those they want to run in their environment.
- C. OTM will install agents into domains such as PUBLIC and SERVPROV.
- D. OTM will install agents into the designated "company" domain, but not into domains such as PUBLIC and SERVPROV.
- E. By default, some agents are active, while others are inactive. The Administrator or other authorized persons must review the agents and activate or deactivate appropriately.
Answer: A,C
NEW QUESTION 31
Which business object do you use to set up the details of the classification data that you want to download and configure how it is mapped from the content provider's data to the Global Trade Management (GTM) data structure?
- A. Data Load Type
- B. Content Source
- C. External System
- D. Product Classification Category
Answer: C
NEW QUESTION 32
Which four of the following components make up a Compliance Rule in Global Trade Management (GTM)?
(Choose four.)
- A. Control Type
- B. Control Code
- C. Commerce Control List
- D. Regime
- E. Region
Answer: A,B,D,E
NEW QUESTION 33
Which two statements about shipment statuses are true? (Choose two.)
- A. ENROUTE_UNLOADED PARTIAL - indicates that the shipment has reached the final destination and is in the process of being unloaded.
- B. ENROUTE_NOT STARTED - indicates that the shipment has not been picked up from the initial pickup stop yet.
- C. ENROUTE_ENROUTE - indicates that the shipment is moving from one location to another.
- D. ENROUTE_DIVERTED - indicates that the shipment was delayed in leaving the previous location due to the late pickup time, and will be late arriving to the destination location.
- E. ENROUTE_DELAYED - indicates that the shipment was unable to travel on the planned route, and has taken a detour.
Answer: B,C
NEW QUESTION 34
Which two options must be defined for shipment planning? (Choose two.)
- A. Equipment
- B. Equipment Type
- C. Equipment Group
- D. Equipment Group Profile
- E. Equipment Class
Answer: A,B
NEW QUESTION 35
......
100% Free 1Z0-1079-20 Daily Practice Exam With 55 Questions: https://actualtests.prep4away.com/Oracle-certification/braindumps.1Z0-1079-20.ete.file.html