Latest 200-301 Practice Test Questions Verified Answers As Experienced in the Actual Test!
Pass Cisco 200-301 Exam in First Attempt Easily
Introduction
The primary responsibility of the Associate Network Engineer is to update the technical standards and strategic technical roadmaps. The professionals must take care of the network engineering policies, and operations that include network programmability. The Network Engineer has to act as backup for the LAN/WAN and Firewall teams whenever required. They must install, monitor, and maintain the LAN infrastructure. The professional should make sure smooth and proper functionality of the network system.
The Associate Network Engineer takes care of the hardware components and others such as cabling and wiring. The professionals provide the necessary technical assistance needed for installation and maintenance of WAN infrastructure. They examine and network capacity and implement network tools. The Network Engineer recognizes and resolves network hardware and software problems. They set up user accounts and passwords, and protect access to confidential data.
Target Audience
According to Cisco, the new CCNA designation is well-suited to specific roles such as a network administrator and network support engineer. Some topics that are included in the certification exam would also suit CCNA technicians working alongside software developers in many organizations.
Official Preparation Path
The vendor recommends that all aspiring candidates should first gain the required skills before continuing with their certification journey. And one of the best ways to achieve this is through the official training course, which is Implementing and Administering Cisco Solutions (CCNA) v1.0. Let’s find out what the actual course content entails.
NEW QUESTION # 435
Which type of address is shared by routers in a HSRP implementation and used by hosts on the subnet as their default gateway address?
- A. loopback IP address
- B. multicast address
- C. virtual IP address
- D. broadcast address
Answer: C
NEW QUESTION # 436
Refer to the exhibit.
Which password must an engineer use to enter the enable mode?
- A. testing 1234
- B. adminadmin123
- C. cisco123
- D. default
Answer: A
Explanation:
Explanation
If neither the enable password command nor the enable secret command is configured, and if there is a line password configured for the console, the console line password serves as the enable password for all VTY sessions -> The "enable secret" will be used first if available, then "enable password" and line password.
NEW QUESTION # 437
Refer to the exhibit.
What is the effect of this configuration?
- A. Dynamic ARP Inspection is disabled because the ARP ACL is missing.
- B. The switch port interface trust state becomes untrusted.
- C. The switch port remains administratively down until the interface is connected to another switch.
- D. The switch port remains down until it is configured to trust or untrust incoming packets.
Answer: B
NEW QUESTION # 438
Drag and drop the IPv6 address type characteristics from the left to the right.
Answer:
Explanation:
NEW QUESTION # 439
Refer to the exhibit. Which two events occur on the interface, if packets from an unknown Source address arrive after the interface learns the maximum number of secure MAC address? (Choose two.)
- A. The interface is error-disabled
- B. The security violation counter dose not increment
- C. The interface drops traffic from unknown MAC address
- D. A syslog message is generated
- E. The port LED turns off
Answer: B,C
Explanation:
Section: Security Fundamentals
Explanation/Reference:
NEW QUESTION # 440
Drag and drop the HTTP methods used with REST-Based APIs from the left onto the descriptions on the right.
Answer:
Explanation:
NEW QUESTION # 441 
Refer to the exhibit. Drag and drop the subnet masks from the left onto the corresponding subnets on the right.
Not all subnet masks used.
Answer:
Explanation:
NEW QUESTION # 442
Refer to the exhibit.
Switch AccSw2 has just been added to the network along with PC2. All VLANs have been implemented on AccSw2. How must the ports on AccSw2 be configured to establish Layer 2 connectivity between PC1 and PC2?
- A.
- B.
- C.
- D.
Answer: B
NEW QUESTION # 443
Drag drop the descriptions from the left onto the correct configuration-management technologies on the right.
Answer:
Explanation:
Explanation:
The focus of Ansible is to be streamlined and fast, and to require no node agent installation.
Thus, Ansible performs all functions over SSH. Ansible is built on Python, in contrast to the Ruby foundation of Puppet and Chef.
TCP port 10002 is the command port. It may be configured in the Chef Push Jobs configuration file .
This port allows Chef Push Jobs clients to communicate with the Chef Push Jobs server.
Puppet is an open-source configuration management solution, which is built with Ruby and offers custom Domain Specific Language (DSL) and Embedded Ruby (ERB) templates to create custom Puppet language files, offering a declarative-paradigm programming approach.
A Puppet piece of code is called a manifest, and is a file with .pp extension.
NEW QUESTION # 444
Drag drop the descriptions from the left onto the correct configuration-management technologies on the right.
Answer:
Explanation:
NEW QUESTION # 445
Refer to the exhibit.
What is the correct next hop for router R1 to reach IP addresses 192.168.2.86 and 10.20.1.50?
- A. 172.16.1.2
- B. 172.16.1.1
- C. 172.16.1.3
- D. 172.16.1.4
Answer: C
NEW QUESTION # 446
Refer to the exhibit.
Wireless LAN access must be set up to force all clients from the NA WLAN to authenticate against the local database. The WLAN is configured for local EAP authentication. The time that users access the network must not be limited. Which action completes this configuration?
- A. Uncheck the Guest User check box
- B. Set the Lifetime (seconds) value to 0
- C. Clear the Lifetime (seconds) value
- D. Check the Guest User Role check box
Answer: B
NEW QUESTION # 447
Refer to the exhibit.
The image server and client A are running an application that transfers an extremely high volume of data between the two. An engineer is configuring a dedicated circuit between R1 and R2. Which set of commands must the engineer apply to the routers so that only traffic between the image server and client A is forces to use the new circuit?
- A. R1(config)#ip route 10.10.13.10 255.255.255.255 10.10.10.6R2(config)#ip route 192.168.0.100
255.255.255.255 10.10.10.5 - B. R1(config)#ip route 10.10.13.10 255.255.255.255 10.10.10.2R2(config)#ip route 192.168.0.100
255.255.255.255 10.10.10.1 - C. R1(config)#ip route 10.10.13.10 255.255.255.128 10.10.10.6R2(config)#lp route 192.168.0.100
255.255.255.0 10.10.10.5 - D. R1(config)#ip route 10.10.13.10 255.255.255.252 10.10.10.6R2(config)#tp route 192.168.0.100
255.255.255.252 10.10.10.5
Answer: B
NEW QUESTION # 448
Refer to the exhibit.
An engineer is required to verify that the network parameters are valid for the users wireless LAN connectivity on a /24 subnet. Drag and drop the values from the left onto the network parameters on the right. Not all values are used.
Answer:
Explanation:
NEW QUESTION # 449
Drag and drop the attack-mitigation techniques from the left onto the Types of attack that they mitigate on the right.
Answer:
Explanation:
NEW QUESTION # 450
Refer to the exhibit.
which path is used by the router for internet traffic ?
- A. 10.10.10.0/28
- B. 10.10.13.0/24
- C. 209.165.200.0/27
- D. 0.0.0.0/0
Answer: D
NEW QUESTION # 451
Refer to the exhibit.
Refer to the exhibit. The IPv6 address for the LAN segment on router R1 must be configured using the EUI-
64 format. When configured which ipv6 address is produced by the router?
- A. 2001:db8:1a44:41a4:C801:BEFF:FE4A:1
- B. 2001:db8:1a44:41a4:C081:BFFF:FE4A:1
- C. 2001:db8:1a44:41a4:4562:098F:FE36:1
- D. 2001:db8:1a44:41a4:C800:BAFE:FF00:1
Answer: B
NEW QUESTION # 452
Drag and drop the statement about networking from the left into the Corresponding networking types on the right. Not all statements are used.
Answer:
Explanation:
NEW QUESTION # 453
What is a function of a remote access VPN?
- A. establishes a secure tunnel between two branch sites
- B. uses cryptographic tunneling to protect the privacy of data for multiple users simultaneously
- C. allows the users to access company internal network resources through a secure tunnel
- D. uses exclusively when a user is connected to a company's internal network
Answer: C
Explanation:
Section: Security Fundamentals
NEW QUESTION # 454
Refer to the exhibit.
Based on the LACP neighbor status, in which mode is the SW1 port channel configured?
- A. active
- B. mode on
- C. passive
- D. auto
Answer: A
Explanation:
Explanation
From the neighbor status, we notice the "Flags" are SP. "P" here means the neighbor is in Passive mode.In order to create an Etherchannel interface, the (local) SW1 ports should be in Active mode.Moreover, the "Port State" in the exhibit is "0x3c" (which equals to "00111100 in binary format).Bit 3 is "1" which means the ports are synchronizing -> the ports are working so the local ports should be in Active mode.
NEW QUESTION # 455
......
We offers you the latest free online 200-301 dumps to practice: https://actualtests.prep4away.com/Cisco-certification/braindumps.200-301.ete.file.html